How to Use the DIN Abrasion Tester:
1. Prepare the sample
First, cut the material to size and make sure there are no contaminants on the surface.
2. Place the sample
Place the material accurately on the measuring device and ensure it is properly aligned.
3. Set the test parameters
Adjust key settings such as wear distance, applied pressure and rotation speed according to the specified test standard. Make sure the parameters are accurate to obtain accurate measurement results.
4. Start the test
Begin the wear process - the machine will apply a consistent friction force to evaluate the wear resistance of the material.
5. Evaluate the results
After the experiment, the weight of the sample before and after the experiment should be measured, and then the wear resistance of the sample can be evaluated.